Zyxel WAC6303D-S 802.11ac Wave 2 Dual-Radio Unified Pro Access Point

Description

Features:

Ultimate wireless experience for high-density with true flexibility

The WAC6303D-S has been designed with Smart Antenna technology, to provide clients with the ultimate wireless experience, especially in high-density environment.

Additionally the WAC6303D-S supports NebulaFlexPro which includes one year of Professional pack and triple mode functionality (standalone, hardware controller and Nebula).

MU-MIMO, Definition of Wi-Fi

Stepping up from 802.11ac, the second generation Wave 2 technology introduces Multi-User MIMO (MU-MIMO). This is an important WiFi development that enables an AP to communicate with multiple clients at a time offering 300% performance for a 3×3 AP.

Next Generation Transmit Beamforming benefits overall networking

Transmit Beamforming (TxBF) technology is another key to implement reliable high-density Wi-Fi connection. It increases overall network transmission data rates, which benefits not only MU-MIMO clients but also all existing clients.

Optimal Wireless Experience

WAC6303D-S features Smart antenna technology which is proven able to mitigate co-channel interference, and adaptively adjust antenna patterns to fit in high-density application.

Built for Superior performance

The WAC6303D-S is built with a high-efficiency antenna module, premium power amplifiers and low-noise elements delivering superior wireless performance over other Wave 2 access points on the market.

Optimized wireless experience with advanced features

To provide outstanding performance in crowded environment, WAC6303D-S features 3G/4G interference immunity, excellent receive sensitivity and DCS, which enlarge its service coverage for more clients and better quality of connection.

RF Specifications
802.11n/ac premium features	2.4GHz: 2×2 MIMO with two spatial stream (SU-MIMO) 5GHz: 3×3 MIMO with three spatial stream (SU-, or MU-MIMO) 802.11ac beamforming (transmit beamforming) Maximal ratio combining (MRC) Low End Sensitivity Improvements (LESI) Time Domain Channel Smoothing 20-, 40- and 80-MHz channels PHY data rates total up to 300 Mbps (11n) + 1300 Mbps (11ac) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) Cyclic Delay diversity (CSD) support Maximum Likelihood Demodulation (MLD) support Low Density Parity Check (LDPC) support
Typical transmit output power (dBm)1	US (FCC) 2.4 GHz: 25 dBm US (FCC) 5 G GHz: 28 dBm EU (ETSI) 2.4 GHz: 20 dBm EU (ETSI) 5 G GHz: 26 dBm
Antenna gain	2.4 GHz: 3 dBi; 2×2 MIMO 5 GHz: 4 dBi 3×3 MIMO
Support data rate	802.11a/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps 802.11n: up to 300 Mbps in MCS15 (40MHz; 2 Spatial Streams; GI=400ns) 802.11ac:up to 1300 Mbps in MCS9 (80MHz; 3 Spatial Streams; GI=400ns)
Receive sensitivity	Min. Rx sensitivity up to -103 dBm
Interfaces
Number of 10/100/1000M LAN	2 x switch ports
Console port	4-Pin serial
Input power requirements	Direct DC power or Power over Ethernet (PoE)2
PoE	802.3at (full mode) 802.3af (Restrict 2.4G & 5G radio to one transmit stream only.)
PoE power draw	16.2W (802.3at PoE)
WLAN
WLAN maximum throughput	Up to 1600 Mbps
Fast roaming	Pre-authentication and PMK caching
Wireless Security	WPA/WPA2-PSK WPA/WPA2-Enterprise WLAN access control list EAP type IEEE 802.1X MAC filtering Web authentication3 Layer-2 isolation RADIUS authentication Microsoft AD authentication3 LDAP authentication3 MAC authentication3 Rogue AP detection
Number of SSID	16
QoS	WMM WMM power save U-APSD DiffServ marking
Network
IPv6 support	Yes
VLANs	Yes
DHCP client	Yes
Management
Operating mode	Nebula Cloud managed Controller-managed Standalone
ZON Utility4	Discovery of Zyxel switches, APs and gateways Centralized and batch configurations IP configuration IP ren-ew Device factory reset Device reboot Device locating Web GUI access Firmware upgrade Password configuration One-cl-ick quick association with Zyxel AP Configurator (ZAC)
Smart Connect	Neighbor device discovery One-cl-ick remote management access to the neighboring Zyxel devices
Zyxel AP Configurator5	Batch AP configuration Batch AP firmware upgrade Batch AP profile backup
Zyxel Wireless Optimizer6	WiFi AP planning WiFi coverage detection Wireless health management
Standalone AP mode	Yes
Managed AP mode	Yes
CLI	Yes
SNMP	v2c/v3
Standard Compliance
Ethernet	IEEE 802.3 IEEE 802.3u IEEE 802.11ab IEEE 802.3au IEEE 802.3az IEEE 802.3af/at
PoE	IEEE 802.3af/at
WLAN	802.11b: DBPSK, DQPSK, CCK 802.11g: BPSK, QPSK, 16-QAM, 64-QAM 802.11a: BPSK, QPSK, 16-QAM, 64-QAM 802.11n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM
Certifications
Radio	FCC Part 15C FCC Part 15E ETSI EN 300 328 EN 301 893 LP0002 EN 60601-1-2
EMC	FCC Part 15B EN 301 489-1 EN 301 489-17 EN55032 EN55024 EN61000-3-2/-3 BSMI CNS13438
Safety	EN 60950-1 IEC 60950-1 BSMI CNS14336-1
Physical Specifications and others
Item	Dimensions (WxDxH)(mm/in.) 211 x 223 x 39 / 8.31 x 8.78 x 1.54 Weight (kg/lb.) 800/1.76
Included accessories	Wall/ceiling mount plate
Plenum rating	Yes
Kensington lock support	Yes
Power supply	Input: AC 100-240V, 50~60Hz Output: DC +12V 2A (Sold separately)
MTBF (hr)	3,960,217
Environmental Specifications
Operating	Temperature -20°C to 60°C / -4°F to 140°F Humidity 10% to 90% (Non-condensing)
Storage	Temperature -40°C to 70°C / -40°F to 158°F Humidity 10% to 90%