Description
Alderon, 1835, Smart Panel Single Phase Quadplex, Demand Dosing, 120VAC, 0-15 FLA, Type 4X, Circuit Breakers, (6) 20′ Control Float Switches
Features:
- Elapsed Time Meter (Auto mode only)
- Pump Cycle Counter (Auto mode only)
- Alarm Cycle Counter
- Flashing Alarm Indicator
- Enclosure – Thermoplastic for Nema 4X
- HOA Switch – Automatic or manual pump control
- Pump Run Indicator
- Fused Control Disconnect (Provides on/off function)
- IEC Motor Contactor
- Field Wiring Terminal Block
- Terminal Block Field
- Wiring label
- Ground Lug
- Mechanical Float Switches – Patented switching mechanism
- Float Switches Labeled – For easy field wiring
- Alarm Indicator – Top mounted beacon
- Alarm Buzzer – Loud 100 db warble
- Auto Reset Silence Switch – Horn silence
- Industrial Control Panel
The Smart Panel™ Single Phase Quadplex control panel is used to operate four (4) pumps for demand dose, water or wastewater applications. Comes in 120VAC, 0-15 FLA Ranges, and a Type 4X (outdoor) enclosure. The control panel includes six (6) 20′ normally open control switches with stainless steel pipe clamps and a hand-off-auto (HOA) switch with pump run indicator for each pump. The incoming and pump power must match system voltage with conduit connections (required) per local codes. Refer to included electrical schematic for complete wiring and voltage information.
The control panel is operated by the included control switches for pump stop, pump lead, pump lag 1, pump lag 2, pump lag 3, and high liquid level alarm. As the liquid level rises activating the pump lead switch, the pump will start and continue to run until the pump stop switch is deactivated to complete the pump cycle. If the pump lag 1, pump lag 2, and/or pump lag 3 switches are activated, the second/third/fourth pump(s) will start and the pump(s) will continue to run until the pump stop switch is deactivated. If the high level alarm switch is activated, an alarm condition occurs. During an alarm condition, the beacon will illuminate and buzzer will annunciate. If the alarm test/silence switch is toggled to “silence” during an alarm condition, it will silence the buzzer while the alarm beacon remains illuminated. The alarm condition will reset when the high level alarm switch deactivates and the system will auto reset for the next alarm cycle. Test alarm once a month to ensure system integrity, toggle the alarm test/silence switch to “test”, the beacon should illuminate and buzzer should annunciate.
The Smart Relay includes: pump and float status indicators, elapsed time meters, and event counters.
For more information, please see Data Sheet and Quick Start Quide
| Smart Panel™ – Single Phase Quadplex, Demand Dose | |
| Primary Power | 120VAC, 0-15 FLA Range, 60 Hz |
| Phase/Pump Type | Single Phase, Quadplex |
| Terminal Blocks | 120VAC, 30A, 50A, and 100A |
| IEC Motor Contactors | 120VAC, 18A, 25A, or 32A, 50/60 Hz; 3-Pole, Normally Open |
| Circuit Breaker | 120VAC, 1P or 2P, 30A, 40A, or 60A |
| Smart Relay | (12) 120VAC, AC Inputs and (8) Relay Outputs, 8A |
| Alarm Beacon | 15 Watt, Polycarbonate (red) |
| Alarm Buzzer | 120VAC, 95 dB at 2-feet |
| Control Relays | 120VAC, 12A, Four Pole, Double Throw |
| Fuses (fast acting type AGC) | 250VAC maximum, 1 Amp, 5mm x 20mm |
| Hand-Off-Auto Switches | 120VAC, 6A, Single Pole, Double Throw |
| Test/Silence Switch | 120VAC, 6A, Single Pole, Double Throw |
| Pump Run Indicator | 125VAC, 3 Watt, Neon (green) |
| Enclosure | Thermoplastic; 18 x 16 x 10 (inches); Type 4X, Outdoor; Enclosure Screws |
| Control Switches | 4 Amps, 120VAC, bare lead; (6) 20’ Narrow Angle, Normally Open; Stainless Steel Pipe Clamps |
| Certifications | UL 508 (US and Canada) |
Reviews
There are no reviews yet.